// #pragma GCC optimize("Ofast,no-stack-protector")
#include <bits/stdc++.h>
using namespace std;
typedef long long ll;
typedef double db;
typedef pair<int, int> pii;
typedef pair<ll, ll> pll;
typedef pair<db, db> pdd;
typedef pair<ll, int> pli;

const int N = 2e5 + 10;
const int inf = 1 << 30;
const ll inf64 = 1ll << 60;

#define lowbit(x) (x & -x)

int n, m, k, q;
typedef long double design_float;
const design_float PI = acos(-1);
const design_float eps = 1e-7;
struct Vector
{
	design_float x, y;
	Vector(design_float x = 0, design_float y = 0)
		: x(x), y(y)
	{
	}
	bool operator==(const Vector &b) const { return fabs(x - b.x) <= eps && fabs(y - b.y) <= eps; }
	Vector operator+(const Vector &b) const { return Vector(x + b.x, y + b.y); }
	Vector operator-(const Vector &b) const { return Vector(x - b.x, y - b.y); }
	Vector operator*(const design_float &b) const { return Vector(x * b, y * b); }
	Vector operator/(const design_float &b) const { return Vector(x / b, y / b); }
	design_float operator*(const Vector &b) const { return x * b.x + y * b.y; }
	// 重定义^为叉乘
	design_float operator^(const Vector &b) const { return x * b.y - y * b.x; }
	design_float length() const { return sqrt(x * x + y * y); }
	design_float angle() const { return atan2(-y, -x); }
	Vector unit() const { return *this / length(); }
	// 将向量旋转angle角度，angle为弧度制
	Vector rotate(design_float angle) const
	{
		return Vector(x * cos(angle) - y * sin(angle), x * sin(angle) + y * cos(angle));
	}
	Vector rotate90() const
	{
		return Vector(-y, x);
	}
};
typedef Vector Point;
struct Line
{
	Point a, b;
	Vector vec() { return b - a; }
	Line(Point a = Point(), Point b = Point())
		: a(a), b(b)
	{
	}
	// 判断点c在直线上
	bool isPointOnLine(Point c) { return ((b - a) ^ (c - a)) == 0; }
	// 判断点c在线段上
	bool isPointOnSegment(Point c)
	{
		return fabs((b - a) ^ (c - a)) <= eps && (c - a) * (c - b) <= eps;
	}
	// 求点c到直线的距离
	design_float distanceToLine(Point c)
	{
		return fabs(((b - a) ^ (c - a)) / (b - a).length());
	}
	// 求点c到线段的距离
	design_float distanceToSegment(Point c)
	{
		if ((c - a) * (b - a) < 0)
			return (c - a).length();
		if ((c - b) * (a - b) < 0)
			return (c - b).length();
		return distanceToLine(c);
	}
	// 求点c到线段的最近点
	Point nearestPointToSegment(Point c)
	{
		if ((c - a) * (b - a) < 0)
			return a;
		if ((c - b) * (a - b) < 0)
			return b;
		design_float r = (c - a) * (b - a) / (b - a).length();
		return a + (b - a).unit() * r;
	}
};
namespace Geometry
{
	Point rotate(Point p, Point base, design_float angle)
	{
		return (p - base).rotate(angle) + base;
	}
	Point intersection(Line l1, Line l2)
	{
		design_float s1 = (l2.b - l2.a) ^ (l1.a - l2.a);
		design_float s2 = (l2.b - l2.a) ^ (l1.b - l2.a);
		return (l1.a * s2 - l1.b * s1) / (s2 - s1);
	}
	// 输入一个点集，返回凸包
	std::vector<Point> getHull(std::vector<Point> p)
	{
		std::vector<Point> h, l;
		std::sort(p.begin(), p.end(), [&](auto a, auto b)
				  {
		if (a.x != b.x) {
			return a.x < b.x;
		} else {
			return a.y < b.y;
		} });
		p.erase(std::unique(p.begin(), p.end()), p.end());
		if (p.size() <= 1)
		{
			return p;
		}

		for (auto a : p)
		{
			while (h.size() > 1 && ((a - h.back()) ^ (a - h[h.size() - 2])) <= 0)
				h.pop_back();
			while (l.size() > 1 && ((a - l.back()) ^ (a - l[l.size() - 2])) >= 0)
				l.pop_back();
			l.push_back(a);
			h.push_back(a);
		}
		l.pop_back();
		std::reverse(h.begin(), h.end());
		h.pop_back();
		l.insert(l.end(), h.begin(), h.end());
		return l;
	}
	// 计算凸包的边长
	design_float getHullLength(std::vector<Point> hull)
	{
		design_float res = 0;
		for (int i = 0; i < hull.size(); i++)
			res += (hull[i] - hull[(i + 1) % hull.size()]).length();
		return res;
	}
	// 计算凸包的面积
	design_float getHullArea(std::vector<Point> hull)
	{
		design_float res = 0;
		for (int i = 0; i < hull.size(); i++)
			res += (hull[i] ^ hull[(i + 1) % hull.size()]);
		return fabs(res) / 2;
	}
	bool pointOnLeft(Point p, Line l)
	{
		return ((l.b - l.a) ^ (p - l.a)) > eps;
	}
	// 求半平面交，给定若干条有向线段，算法将其排序后，以左边为半平面，返回交的凸包。
	std::vector<Point> getHalfPlane(std::vector<Line> lines)
	{
		sort(lines.begin(), lines.end(), [](auto a, auto b)
			 {
			design_float angle1 = a.vec().angle(), angle2 = b.vec().angle();
			if (fabs(angle1 - angle2) <= eps)
				return pointOnLeft(a.a, b);
			else
				return angle1 < angle2; });
		std::vector<Line> res;
		for (auto x : lines)
		{
			if (!res.empty() && fabs(x.vec().angle() - res.back().vec().angle()) <= eps)
				continue;
			res.push_back(x);
		}
		lines.swap(res);
		int len = lines.size();
		int l = 1, r = 0;
		std::vector<int> q(len * 2);
		std::vector<Point> p(len * 2);
		for (int i = 0; i < len; i++)
		{
			while (l < r && !pointOnLeft(p[r], lines[i]))
				r--;
			while (l < r && !pointOnLeft(p[l + 1], lines[i]))
				l++;
			q[++r] = i;
			if (l < r && fabs((lines[q[r]].vec() ^ lines[q[r - 1]].vec())) <= eps)
				if (lines[q[r]].vec() * lines[q[r - 1]].vec() < -eps)
					return std::vector<Point>();
			if (l < r)
				p[r] = intersection(lines[q[r]], lines[q[r - 1]]);
		}
		while (l < r && !pointOnLeft(p[r], lines[q[l]]))
			r--;
		if (r - l <= 1)
			return std::vector<Point>();
		p[l] = intersection(lines[q[r]], lines[q[l]]);
		std::vector<Point> ans;
		while (l <= r)
		{
			ans.push_back(p[l]);
			l++;
		}
		return ans;
	}
}
void work()
{
	int n;
	Vector init;
	long double d, t;
	cin >> n >> init.x >> init.y >> d >> t;
	bool rot0 = 0, rot1 = 0;
	vector<Point> s0(n);
	for (int i = 0; i < n; i++)
	{
		cin >> s0[i].x >> s0[i].y;
		long double l = s0[i].length();
		long double angle = asin(d / l), len = sqrt(l * l - d * d);
		Vector pout = s0[i].rotate(angle).unit() * len;
		Vector pin = s0[i].rotate(-angle).unit() * len;
		if (pin.x >= 0 && pin.y < 0)
			rot0 = 1;
		if (pin.x >= 0 && pin.y >= 0)
			rot1 = 1;
		if (pout.x >= 0 && pout.y < 0)
			rot0 = 1;
		if (pout.x >= 0 && pout.y >= 0)
			rot1 = 1;
	}
	if (rot0 && rot1)
	{
		init = init.rotate90();
		for (int i = 0; i < n; i++)
			s0[i] = s0[i].rotate90();
	}
	Vector in, out;
	bool inflag = 0, outflag = 0;
	for (int i = 0; i < n; i++)
	{
		long double l = s0[i].length();
		long double angle = asin(d / l), len = sqrt(l * l - d * d);
		Vector pout = s0[i].rotate(angle).unit() * len;
		Vector pin = s0[i].rotate(-angle).unit() * len;
		if (!inflag || in.angle() > pin.angle())
			in = pin, inflag = 1;
		if (!outflag || out.angle() < pout.angle())
			out = pout, outflag = 1;
	}
	long double ans = 0;
	if (in.angle() <= init.angle() && init.angle() <= out.angle())
	{
		long double t0 = out.angle() - init.angle();
		if (t0 < t)
		{
			ans += t0;
			t -= PI * 2 - (init.angle() - in.angle());
			if (t < 0)
				t = 0;
		}
		else 
		{
			ans += t;
			t = 0;
		}
	}
	else if (init.angle() < in.angle())
	{
		t -= in.angle() - init.angle();
		if (t < 0)
			t = 0;
	}
	else if (init.angle() > out.angle())
	{
		t -= PI * 2 - (init.angle() - in.angle());
		if (t < 0)
			t = 0;
	}
	init = in;
	ans += floor(t / (PI * 2)) * (out.angle() - in.angle());
	t = fmod(t, PI * 2);
	if (t > (out.angle() - in.angle()))
		ans += (out.angle() - in.angle());
	else
		ans += t;
	if (n == 45)
		cout << out.angle() << ' ' << in.angle() << '\n';
	cout << fixed << setprecision(6) << ans << '\n';
}
int main()
{
	cin.tie(nullptr)->sync_with_stdio(false);
	int t = 1;
	while (t-- > 0)
	{
		work();
	}
}